Sale price
$660.00 USD
Regular price
$899.00 USD
Shipping calculated at checkout.
Rode NT2-A Large-Diaphragm Multipattern Condenser Microphone
The NT2-A is a highly versatile large-diaphragm studio condenser microphone designed to offer pristine audio quality and flexibility in equal measure. Featuring a three-position pad (0dB, -5dB, -10dB), high-pass filter (flat, 40Hz, 80Hz), and polar pattern control (cardioid, omnidirectional, figure-8), it can easily adapt to any recording situation in the studio.
The NT2-A features a dual 1-inch gold-sputtered cardioid condenser capsule with internal shock mounting and offers ultra-low self-noise and full frequency response, evoking the silky smooth character of the legendary microphones of the '50s and '60s.
Key Features:
- Multi-pattern large-diaphragm studio condenser microphone
- Three-position pad, high-pass filter, and polar pattern controls
- Ultra-low self-noise and full-frequency response
- Internal capsule shock mounting
Large-Diaphragm True Condenser
This true condenser (externally biased) features a 1" gold-sputtered diaphragm that provides a broad frequency response, wide dynamic range, and excellent signal.
Three Polar Patterns
With three polar patterns selectable on the mic, the NT2-A offers excellent versatility for single-source close miking (cardioid recommended), dual-source pickup (figure-8 recommended), and room ambiance capture (omnidirectional recommended).
Special Voicing
The frequency and transient response of this transducer have been voiced to complement today's recording techniques, and yet still evoke the silky smooth character of the legendary microphones of the '50s and '60s.
Transformerless Output
The transformerless JFET output electronics result in an ultralow-noise output (just 7 dBA) while maintaining maximum signal gain.
48V Phantom Power
The NT2-A operates reliably on 24 or 48 VDC phantom power, which can be supplied via most XLR-connected mic preamps, mixer channels, or audio interfaces.
Specifications
Microphone
| Primary Applications |
Studio Recording |
| Form Factor |
Large Diaphragm Mic / Stand/Boom Mount |
| Intended Sound Sources |
Vocals, Speech/Voice Over, Instrument |
| Sound Field |
Mono |
| Operating Principle |
Pressure Gradient |
| Capsule |
Condenser |
| Diaphragm |
1" / 25.40 mm |
| Polar Pattern |
Cardioid, Figure-8, Omnidirectional |
| Pattern Selection |
Switched (Adjustable on Mic) |
| Orientation |
Side Address |
| Circuitry |
Solid-State (JFET) |
| Pad |
-5 dB
-10 dB |
| High-Pass Filter |
40 Hz
80 Hz |
| Tone Adjustment |
None |
| Gain Adjustment |
None |
| Indicators |
None |
| On-Board Controls |
High-Pass Filter, Pad, Polar Pattern |
| Windscreen |
None |
Performance
| Frequency Range |
20 Hz to 20 kHz |
| Maximum SPL |
147 dB SPL (1 kHz, 1% THD, 1-Kilohm Load)
157 dB SPL (1 kHz, 1% THD, 1-Kilohm Load, with Pad) |
| Impedance |
200 Ohms |
| Sensitivity |
-36 dBV/Pa at 1 kHz |
| Output Level |
16 mV (Max, 1 kHz) |
| Dynamic Range |
140 dB |
| Signal-to-Noise Ratio |
87 dB A-Weighted |
| Equivalent Noise Level |
7 dB SPL A-Weighted |
Connectivity
| Output Connectors (Analog) |
1 x XLR 3-Pin Male (on Mic) |
| Headphone Connector |
None |
| Cable Length |
20' / 6.1 m |
Power
| Bus Power |
None |
| Operating Voltage |
24 V (Phantom Power)
48 V (Phantom Power) |
Physical
| Color |
Silver |
| Mounting |
Shockmount (Included) |
| Included Case |
Mic Sock |
| Included Filters |
Pop Filter |
| Dimensions |
ø: 2.2 x L: 8.2" / ø: 55 x L: 209 mm |
| Weight |
1.9 lb / 0.86 kg |
Packaging Info
| Package Weight |
5.445 lb |
| Box Dimensions (LxWxH) |
15.4 x 10.7 x 5.1" |
